Snapon Diagnostics Product Forums

Snapon Diagnostics Product Forums (http://productforum.autorepairdata.com/forum/index.php)
-   Verus User Forum (http://productforum.autorepairdata.com/forum/forumdisplay.php?f=56)
-   -   Verus D10 schematic (http://productforum.autorepairdata.com/forum/showthread.php?t=13351)

mark33067 11-30-2018 09:26 AM

Verus D10 schematic
 
Hello group,
I have a Verus D10 with a burnt transistor (Q60) I can't read number on part.
Number on the board is 9698BA 1200E
Can somebody help me with this?
Thanking you all in advance.
Mark

Scott_65 12-26-2018 03:12 PM

Good luck with this. I attempted a few years ago to identify the motherboard in my Pro to explore options on upgrading the processor, and eventually made my way to the manufacturer of the board. As soon as I told them the model number of the board, they basically hung up on me. I took that to mean that it was made for Snap-On only, or a select few and it was under copyright lock down.

This may have changed somewhere along the way since it's been so long, but I didn't even get close. I wish you luck

mark33067 01-04-2019 04:33 AM

Hi Scott, thank you.

Nelix 02-03-2019 11:12 AM

Quote:

Originally Posted by mark33067 (Post 62763)
Hello group,
I have a Verus D10 with a burnt transistor (Q60) I can't read number on part.
Number on the board is 9698BA 1200E
Can somebody help me with this?
Thanking you all in advance.
Mark

I am due to take my Verus Pro D10 apart soon, I purchased it with damaged USB ports so they need replacing, I've managed to track down the correct ports as they were not a common design and am awaiting delivery of them which will probable be the end of this month.

I'll try and get a number from the part while I have it apart, can you PM a picture of where specifically on the board this transistor resides.

Cheers

Nelix

Nitro468 09-19-2019 07:27 PM

Verus transistor
 
Have you found out any information on the Verus D10 ?? I got one that has dead USB ports, replaced the port and still no response from the scope module or the VCI... I do have a good picture of the chip if you still need it.

Nelix 09-19-2019 11:19 PM

Quote:

Originally Posted by Nitro468 (Post 64779)
Have you found out any information on the Verus D10 ?? I got one that has dead USB ports, replaced the port and still no response from the scope module or the VCI... I do have a good picture of the chip if you still need it.

Where did you get you USB port from, I couldnít find the correct ones anywhere, all the ones I found where inverted so both power and data +/- where swapped around and I had to make an adaptor cable.

Regards

Nitro468 09-20-2019 08:58 AM

Hmmm Someone gave me a link for AliExpress. I didnít think of checking the polarity of them. Thought they were all the same. I did have to modify the hold down slightly. When I get home Iíll see if I can find the order.

Nitro468 09-21-2019 03:45 PM

This is what I ordered...It can't find the same item again...:( (AliExpress.com)


YuXi 1pcs New double USB female jack connector USB Plug port socket for laptop PC.

I did have to modify the hold down very slightly....

Nelix 09-24-2019 04:07 AM

Quote:

Originally Posted by Nitro468 (Post 64787)
This is what I ordered...It can't find the same item again...:( (AliExpress.com)


YuXi 1pcs New double USB female jack connector USB Plug port socket for laptop PC.

I did have to modify the hold down very slightly....

I canít see a link in your post :(

Nitro468 09-28-2019 12:24 PM

The link is dead... They don't have the same one I got..
I did order 2, gonna rummage around and see if I find it...


All times are GMT -7. The time now is 12:23 AM.


Snap-on is a trademark, registered in the United States and other countries, of Snap-on Incorporated. Other marks are marks of their respective holders.
©2009 Snap-on Incorporated. All rights reserved.