Not only US version has bugs, but Sun-Diagnostics also.
Bundle 7.2 international (has 3 markets coverage: US, Europe & Australia)
I remember 4 issues.
#1 is called "Communication Established".
That happens most on older VW's, and also on Citroen & Peugeot.
How it happens. I'm reading current data with engine running, then I decide to turn key off and if I hasn't end the communication, the next what I see on the next "ignition on" is "Communication Established". The modis won't respond nor on "Yes" or 'No" buttons after that. I could wait for a couple of hours, but the screen is not changing. In that situation I have 2 options: restart modis or press "Reset" button on the top of the screen. I can't understand that glitch!
#2. The modis bring up an error message when I'm trying to select a vehicle to diagnose. "Failed to load to SCPI FPGA". I see it at least once a week. The only option in this case I have is to restart my Modis.
#3. One day I had 2001 Chrysler Voyager diesel (europe) with brake pads light on. I've checked ABS module for errors. There was one trouble code. I can't remember what the code was saying, but it complained on RL speed sensor. I was trying to clear the code, but when I was going thru the code clearing prosess, the modis displayed a message saying that the codes cannot be cleared. ABS worked fine on yhe vehicle.
I would agree that the issue could be a specific to that vehicle, but in about a month later I had 2002 Dodge grand caravan 3.3 (brought from USA). The vehicle had the same code and acted the same way. No problems with ABS.
Anybody had such issues on Chrysler minivans ABS?
#4. I had experience on one european car (can't remember exactly what make). Two values were mixed up. ECT & IAT. I've tried switching different engine and year make but no change.
Bundle 7.2 international (has 3 markets coverage: US, Europe & Australia)
I remember 4 issues.
#1 is called "Communication Established".
That happens most on older VW's, and also on Citroen & Peugeot.
How it happens. I'm reading current data with engine running, then I decide to turn key off and if I hasn't end the communication, the next what I see on the next "ignition on" is "Communication Established". The modis won't respond nor on "Yes" or 'No" buttons after that. I could wait for a couple of hours, but the screen is not changing. In that situation I have 2 options: restart modis or press "Reset" button on the top of the screen. I can't understand that glitch!
#2. The modis bring up an error message when I'm trying to select a vehicle to diagnose. "Failed to load to SCPI FPGA". I see it at least once a week. The only option in this case I have is to restart my Modis.
#3. One day I had 2001 Chrysler Voyager diesel (europe) with brake pads light on. I've checked ABS module for errors. There was one trouble code. I can't remember what the code was saying, but it complained on RL speed sensor. I was trying to clear the code, but when I was going thru the code clearing prosess, the modis displayed a message saying that the codes cannot be cleared. ABS worked fine on yhe vehicle.
I would agree that the issue could be a specific to that vehicle, but in about a month later I had 2002 Dodge grand caravan 3.3 (brought from USA). The vehicle had the same code and acted the same way. No problems with ABS.
Anybody had such issues on Chrysler minivans ABS?
#4. I had experience on one european car (can't remember exactly what make). Two values were mixed up. ECT & IAT. I've tried switching different engine and year make but no change.
Comment