I first want to make a #1 trigger adapter that is not as bulky as the #1 spark plug wire adapter that I could get into tighter areas and go around the primary pigtail of the #1coil or the #1 fuel injector for #1 trigger or rpm reference.
Next I would like to fabricate an adapter to make something work off the the auxiliary cable to use with a pressure transducer.
My first step would be getting the adapter side thread on barrel connector parts to fit the Counselor 2 cable ends.
I Found those parts are available through Digikey.
terminal half of 16 pin barrel style connector AMP 206036-3
terminals 66593
wire side half of barrel connector 206070-8
terminal side half of #1 sparkplug trigger reference adapter barrel connector AMP 206705-2
terminal 66099-3
wire side half of #1 trigger barrel connector AMP 206966-7 or 9
Next I would like to fabricate an adapter to make something work off the the auxiliary cable to use with a pressure transducer.
My first step would be getting the adapter side thread on barrel connector parts to fit the Counselor 2 cable ends.
I Found those parts are available through Digikey.
terminal half of 16 pin barrel style connector AMP 206036-3
terminals 66593
wire side half of barrel connector 206070-8
terminal side half of #1 sparkplug trigger reference adapter barrel connector AMP 206705-2
terminal 66099-3
wire side half of #1 trigger barrel connector AMP 206966-7 or 9
Comment