vauxhall combo 1.7 dtci

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • JEFFREY MORRIS
    Junior Member
    • Jul 2010
    • 3

    vauxhall combo 1.7 dtci

    we have 2004 combo van that wont rev up reading codes p1120,p1122.
    does anyone know if this is the right pattern for app sensor(pedal positioning sensor)
    Attached Files
    Last edited by JEFFREY MORRIS; 07-15-2010, 05:13 AM. Reason: have uploaded file as bitman image is this correct?
  • David Green
    Senior Member
    • Oct 2009
    • 382

    #2
    Probably better as a jPeg as it would open at the moment?

    David

    Comment

    • leemack
      Member
      • Jul 2010
      • 49

      #3
      To me it looks spot on according to TIS data list.

      I does suggest though that its a pedal sensor error and if they fail it tends to default to a maximum output of 1600rpm.

      I suppose the only thing to do is check live and earths on each pedal track.

      Comment

      • autodoc
        Junior Member
        • Aug 2008
        • 18

        #4
        not too late i hope

        i think the ecu's shot m8 check to make sure you're getting feed to and from the app sensor and if not then pin it back to the ecu vauxhall's got a defect with their ecu's always going down silly idea to bolt an ecu on the engine with the constant temperatures . but quite obviously they dont give a damn because you can always run back to them and they'll sell you a brand new unit for nearly what the vehicle's worth the've got you over a barrell because they know you need to have your vehicle running please let us know how you get on

        Comment

        Working...