Bleed procedure with SOLUS Ultra 2003 Explorer

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • sbebenelli
    Member
    • May 2007
    • 46

    Bleed procedure with SOLUS Ultra 2003 Explorer

    What's the proper way to use the automated bleed procedure with a SOLUS Ultra on a 2003 Explorer?

    Do you go through the procedure on the scan tool then after it says done shut the key off do you then bleed the brakes at all 4 wheels?

    Before starting it says to see service manual for proper procedure and when I look in Mitchell it says to follow the procedure with scan tool.
  • crackerclicker
    Senior Member
    • May 2008
    • 400

    #2
    Originally posted by sbebenelli
    Do you go through the procedure on the scan tool then after it says done shut the key off do you then bleed the brakes at all 4 wheels?
    That's usually how it's done. Depending on the system involved it may simply cycle the valves and motor, or place components in a "home" position. Then you should be ready to confidently bleed.

    Comment

    Working...