Mitchel time is .6 to change a right rear wheel speed sensor on a 01 Town car. Soaked everything with PB blaster but Wheel Speed sensor was frozen in the rear knuckle, I pulled the rear caliper and rear rotor , and no hole existed in axle hub to allow driving the sensor out straight and I had to make the call to either open the diff and pull the axle or attack it with the air hammer punch at an angle and risk damage to the stamped steel tone wheel . Well you just got to do what you got to do , and sometimes it ain't pretty , though I try my best to make it so.
flat rate times for midwest mechanics
Collapse
X
Comment