When using my SOLUS Ultra 11.4 to scan a BMW, if I choose [System ID Mode], at the bottom of the list of control modules is a selection titled [System Scan].
What does this do?
I have run it, and after some time of displaying "...gathering data..." I am returned to the [System ID Mode] menu, with no perceivable changes. Any module I wish to communicate with still needs me to manually identify it, so the scan is not gathering module information.
If I run it again, the SOLUS Ultra goes to blank white screen and locks up, requiring me to hold the power key for >6 seconds to force shutdown and restart of unit.
What does this do?
I have run it, and after some time of displaying "...gathering data..." I am returned to the [System ID Mode] menu, with no perceivable changes. Any module I wish to communicate with still needs me to manually identify it, so the scan is not gathering module information.
If I run it again, the SOLUS Ultra goes to blank white screen and locks up, requiring me to hold the power key for >6 seconds to force shutdown and restart of unit.
Comment