Won't the subscription end sunday night?
FJDS
Collapse
X
-
-
You should always start with the same tear tag if possible but if the hardware is the same it will be compatible. Have you done the PMI and has it completed successfully "Calibration has been loaded and checked."? I believe not all these trucks have PATS I normally try to start and run the engine after the PMI and if it starts and stays running no security "PATS" function needed.Comment
-
Comment
-
Comment
-
you are right i dont think it would, i didnt installed the PCM i found out after i was programing it that it was used and from an F350, i told them to get a new one this time, i will let you guys know how it goes.Comment
-
Ah, no wonder. The part number is the way to go. Also, make sure the part comes out of the same type of car. But the numbers must match. Or it will never work. Good luck and keep us posted!Comment
-
Even better! Glad everything worked out. Now you know how to flash/program PCM for ford. Used one would've worked if it was the same numbers. Maybe next time!Comment
Comment