Hello, I had a 2013 Audi A7, replaced the steering angle sensor module assembly, coded it fine and performed steering angle sensor fine.
However I had a yellow steering wheel symbol on the dash, did some research and found this was for electric power steering assist. The fault code I got from my solus ultra with 18.2 stated fault related to air spring, this car can have 4 airbags for suspension or 4 metal springs, this car has 4 metal springs so this fault code did not make any sense to me.
the fix was the end stops where not learned, with engine running I locked the steering wheel all the way to the right and held for about 4 seconds until I heard a chime, then all the way left lock, until I heard a chime, the light went out and dtc cleared itself, system works as designed.
please make sure the fault code and fault description is correct for this model and system.
thanks.
However I had a yellow steering wheel symbol on the dash, did some research and found this was for electric power steering assist. The fault code I got from my solus ultra with 18.2 stated fault related to air spring, this car can have 4 airbags for suspension or 4 metal springs, this car has 4 metal springs so this fault code did not make any sense to me.
the fix was the end stops where not learned, with engine running I locked the steering wheel all the way to the right and held for about 4 seconds until I heard a chime, then all the way left lock, until I heard a chime, the light went out and dtc cleared itself, system works as designed.
please make sure the fault code and fault description is correct for this model and system.
thanks.
Comment