piece-of-cake?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Matt
    Senior Member
    • Dec 2008
    • 328

    #31
    Thank you Bob. Here are some screen shots of my TDM data.
    Attached Files

    Comment

    • Matt
      Senior Member
      • Dec 2008
      • 328

      #32
      I noticed that "auto learn timer" and "auto learn counter" PIDs never move from 0.

      Comment

      • Matt
        Senior Member
        • Dec 2008
        • 328

        #33
        Here is "Key Learn Data" screen shot.
        Attached Files

        Comment

        • Witsend
          Banned
          • Nov 2012
          • 2942

          #34
          On the substitution detection screen shot I see it says Vin learned (yes) but yet Valid Vin reads (no). Something ain't flying right. Is the new TDM the correct application, or still requires some basic coding or configuration done to it before the Theft relearn and key coding process can be performed and actually take.

          Comment

          • Matt
            Senior Member
            • Dec 2008
            • 328

            #35
            I see that now. Mmmmmm. Why do the "Incorrect VIN" 1-10 PIDs read "no-error"?? PID data has led me to nowhere on more than one occasion too!

            Comment

            • Matt
              Senior Member
              • Dec 2008
              • 328

              #36
              Success!!!!!! In desperation I swapped in old TDM. Started right up and security light went out. Started several times since. Thank you for your help everyone.

              Comment

              • Witsend
                Banned
                • Nov 2012
                • 2942

                #37
                Thumbs up

                Glad you got the Turd done. Emancipation of Shop Constipation

                Comment

                • Stalls
                  Junior Member
                  • Apr 2017
                  • 17

                  #38
                  Sorry to revive this old thread

                  I am having almost the same exact problems with a 14 suburban that original poster Matt had. Even pretty dang close to the same info on screen shots.. I got the vehicle with no communication at all and obviously a result to no crank lol. Ended up diagnosing and replacing both the (new) bcm and (new) transfer case control module to get high speed communication working. Low speed needed (Used) instrument panel cluster and (new) theft deterrent module. All these modules had no communication what so ever and resulted in killing both high and low speed data. All data and modules communicate properly now.

                  New to aftermarket programming scene. Was a GM tech before at dealer. Programmed all modules successfully... Except the used cluster (that was working fine till I tried to update it) and now is dead I tried to program the IPC module last after my TDM wouldn't learn the keys. So out of bordem and while thinking on that I screwed up the cluster lol...

                  Vehicle won't crank or learn (to my knowledge) original keys although one is aftermarket... Another tid bit is the customer purchased this vehicle from auction in this condition and is in perfect shape with only 100k on it. No damage.. Any word of advice would be greatly appreciated! Thanks!
                  Last edited by Stalls; 12-03-2017, 12:44 AM.

                  Comment

                  • Glide
                    Senior Member
                    • Jan 2015
                    • 303

                    #39
                    What tools are you using to flash the modules?

                    Comment

                    • Stalls
                      Junior Member
                      • Apr 2017
                      • 17

                      #40
                      Snap on pass thru pro 3 and the gm program.

                      Comment

                      • Glide
                        Senior Member
                        • Jan 2015
                        • 303

                        #41
                        Funny that both you and the OP have had the same issue,maybe you could call snapon customer assistance or ACDelco.
                        I only use GM MDI for GM programming,so I won't be of much help to you.

                        Comment

                        • Stalls
                          Junior Member
                          • Apr 2017
                          • 17

                          #42
                          I have and they didn't really help much...

                          Comment

                          • Stalls
                            Junior Member
                            • Apr 2017
                            • 17

                            #43
                            Would it be worth trying new keys? I don't know if that will work. I always thought it would relearn any key?

                            Comment

                            • kirkbarrow.garage
                              Senior Member
                              • Jan 2015
                              • 149

                              #44
                              Originally posted by Stalls
                              I have and they didn't really help much...
                              So, no " real surprise " there then.

                              I bet ( 50 cents ) they said obsolete and no parts/software 😂😂😂😂

                              Comment

                              • Witsend
                                Banned
                                • Nov 2012
                                • 2942

                                #45
                                I used to own the Passthrough 3000 that I used to go round and round with support , until my mom yanked me out by my ears from the revolving doors and knocked some sense into me.

                                Comment

                                Working...