Fiat 500L service reset

[MooMoo]

Hi all,
Has anyone had the 'fortune' to service a Fiat 500L...
Solus pro (14.4) will allow you to reset service light but also requests you change oil status in engine ecu. Which is not an option in 'engine'..

Have tried ign on and three stamps on acc pedal.. no avail.

Any help would be appreciated.

Thanks in advance, Mick.

[Witsend]

I think you do the 3 Pump Chump Thing a little slower on a Fiat with a glass of cheap Chianti in hand than on a GM product with a beer in hand.

https://www.youtube.com/watch?v=3I1055FG_S0

[Chron]

Found this info from a Chrysler source:

To reset the oil change indicator system (after performing the scheduled maintenance) perform the following procedure:

1.Turn the ignition switch to the “ON” position. Do not start the engine.
2.Fully press the accelerator pedal slowly three times within ten seconds.
3.Turn the ignition switch to the “LOCK” position.

[MooMoo]

Thanks guys.. I'm sure I tried a few times with three stamps! I'll try the gentle approach on its next visit...!