im having a problem finding correct pressure transducer configuration to use my verus pro. id like to do some in cylinder testing so I can learn to do this myself instead of watching scanner danner or motortrend guys. can yall tell me what I should use. I know paul danner uses a fluke pv 350 for his pico but I don't have a pico and not sure it would work... help
in cylinder testing? whats correct transducer
Collapse
X
-
Tags: None
-
bluetooth pressure transducer, that work like a TPMS?
I don't think I would spend over a grand these days for a single pressure transducer that has long wires and hoses tethered to it, when you can just check relative compression with an amp probe and just go to check real compression and cylinder leak down on suspect cylinder with good analog gauges. I'm thinking Harbor Freight or Autel be selling some wireless digital master compression, fuel pressure, oil pressure tester checker pretty soon for around $119.99Last edited by Witsend; 04-02-2014, 11:28 AM.Comment
-
I don't think I would spend over a grand these days for a single pressure transducer that has long wires and hoses tethered to it, when you can just check relative compression with an amp probe and just go to check real compression and cylinder leak down on suspect cylinder with good analog gauges. I'm thinking Harbor Freight or Autel be selling some wireless digital master compression, fuel pressure, oil pressure tester checker pretty soon for around $119.99
Transducers allow you to see accurately how the pressure builds and decays in the cylinder, in relation to timing events. You cant do this with a mechanical gauge.Comment
-
when you use cheap diagnostic tools you will get cheap results. I always use the pressure transducer with my verus to check compression, its extremely accurate and I can keep screen shots to show the test to customers.
my work is mostly on diesels and telling a customer you need a 12 grand engine plus labor;;;;;well you better be right and have some test results to show why they need to spend that kind of money.Comment
-
Accurate Timing Tests and More
I agree that good tools give reliable results. Being able to see exactly when the valves are opening by putting an in cylinder tranducer on one channel and a trigger signal from the same cylinders ignition coil on a second channel you can accurately see the valve timing of a gasoline engine. I have spotted bad timing gears, chains that are stretched and other components that would be hard to diagnose otherwise. Blowing it up and showing it to the client sells engine jobs and builds customer confidence that we are not guessing at their repairs. JoeComment
-
cylinder wave form
I use the snap-on 500 psi transducer - set the scale to 100psi to capture the running wave form pattern to check valve timing. It works good, I wish snap-on had a pre-set wave form for this with overlays. You have to use the cursers to find the peek to peek time, then divide by 4 to find the time point for exhaust valve opening. Still it works pretty well. It also gives you cranking compression (max pressure reading at the bottom) even when you have the scale set to 100 psi.Comment
-
Using pressure transducer to check compression
Maven mentioned the cost of a good pressure transducer running only around $350, not a grand. I was basing my guess on what I saw Pico site lists and didn't know they cost considerably less elsewhere.
Comment
-
thnx alot guys. i purchased the snapon 500 psi and had to buy the split adapter. it werked great out of the boxes. i tried mak8ng 1 out of a diesel high press transducer and couldnt get to work. appreciate everyones responsesComment
-
-
How do you clean a pressure transducer
How would you go about cleaning a pressure transducer. I just got one. Been trying to learn it before actually need it. Used 3 times on 3 different cars, but only for running compression test.Comment
-
Pressure transducer cleaning
I wouldn't spray anything too harsh like contact cleaner or that gets very cold . If no care instructions , maybe a little WD-40 or mineral spirits on the business end wouldn't hurt it, then wipe it down and store with a a dry clean lintfree cotton rag over the end that will eventually draw out fluid. Whatever residue remains in it after that won't be enough to cross contaminate anything.Comment
-
Forte (Not sure it is available in your area) lubricants are very good , the Fuel System Cleaner can be used to remove oil and leaves no traces, I have used it in cooling systems where oil coolers have leaked internally and the results are brilliant.
Do a google search it may be worth a lookComment
Comment