Pressure sensor

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • gmworldclass
    Junior Member
    • Oct 2010
    • 21

    Pressure sensor

    Can the pressure sensor work with the verdict. I see in component testing
    there is fuel pressure test. What do i need to get it to work
  • kebo1970
    Senior Member
    • Nov 2008
    • 212

    #2
    you would have to use part#EEDM5030 PRESSURE ADAPTER; IT'S ON PAGE 406 IN THE SNAP ON CATALOG 1100. YOU CAN ALSO USE PART#OTC350031 OR FLUPV350 ON PAGE 160 IN THE SNAP ON RWD 2011 CATALOG

    Comment

    • Rich Shepherd
      Snap-on D&I
      • Nov 2006
      • 553

      #3
      Originally posted by gmworldclass
      Can the pressure sensor work with the verdict. I see in component testing
      there is fuel pressure test. What do i need to get it to work
      An new adapter will be required to use the Snap-on 100, 500, and 5000 PSI pressure probes with the M2 meter in conjunction with the D7 display.
      I don't currently have information on when it will be available and will have to check on that.

      There is a 1-500 PSI pressure/1-29"hg vacuum adapter currently available from Snap-on that can be used with the M2 scope/multimeter meter when it's set to Aux and used standalone. The part number is EEDM5030.
      You can see it here:

      Comment

      • Dynodave
        Applications Specialist
        • Oct 2006
        • 68

        #4
        Pressure adapter for DAQ M2 and D7 Verdict Display device.

        Originally posted by gmworldclass
        Can the pressure sensor work with the verdict. I see in component testing
        there is fuel pressure test. What do i need to get it to work

        Hi gm worldclass for the hand held verdict (M2) the blue point pressure adapter works the part number on mine is MT5030



        But if you need this for the D7 display device that controls the DAQ
        There is a special self powered 2 channel pressure adapter. I don’t know if it is for sale yet, (it should be soon) This adapter works well with the current pressure transducers that we have used since the original vantage PRO.
        Hope this helps, Dyno Dave
        Last edited by Dynodave; 02-01-2011, 08:15 PM. Reason: closing

        Comment

        Working...