I'm posting this because of a couple of things I ran into with these BCMs that I haven't with any other Ford BCMs. The first is these are sent from the factory in sleep mode. You can plug it in turn the or press the button and nothing. No scanner communication, no functions so until you wake it up, no programming. The ones I had were push button start vehicles. To deactivate sleep mode, put a key FOB in the slot on the right of the steering column and pre the brake 5 times then press the hazard button twice. The second difference is that there are two parameter reset functions for the PATs system. The first is for the BCM and PCM. The second is for the BCM and the RFA module. If you have the push button start you must do the BCM RFA module reset. I did both resets doing the BCM RFA reset last. If you've installed Ford BCMs before, the rest of the procedure is bit different too but just follow the onscreen directions and it should work out for you.
2015 Escape BCM
Collapse
X
Comment