2011 wcm programming

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • bigharm27
    Junior Member
    • Apr 2018
    • 1

    2011 wcm programming

    Hey I have a 2011 ram 5500 that I have replaced the wcm due to it being hard to turn and operate. Replaced wcm and then used my pass through pro 2 and the Chrysler j2534 unit to reprogram. No luck. Have tried it hundreds of times and after entering the pin which it takes it gives me an error message when trying to transfer the secret key. Any ideas?
  • Steve6911
    Moderator
    • Feb 2007
    • 2168

    #2
    Chrysler and Jboxes are always a roll of the dice. Find someone with a WiTech and have them program it for you.

    Comment

    • ToltecasChavez
      Senior Member
      • Apr 2011
      • 408

      #3
      Newer Models by law will be able to program all that. But for now, older models require Original tool. It's a pain in the azz, but it's true. You need someone with an original tool to program it.

      Comment

      • bestdamgarage
        Member
        • Apr 2016
        • 99

        #4
        Maybe try a autel

        Comment

        • Ruston11
          Member
          • Feb 2015
          • 40

          #5
          wcm

          i usually just do used on Chryslers due to the j2534 shortcomings with these vehicles. Dmax and an Autel will usually work 100 percent of the time with used pcm or new wcm. Good luck.................

          Comment

          Working...