a power balance screen on the verus for the 2003-2007 6.0 diesels would be nice. the IDS machine will show this it"s a welth of information when working on these trucks. perdel readings on the 7.3"s has been one of the best added pid data readings snapon has gave us diesel guy's. the ids will do this on the new 6.4"s too. Im sure they are getting the readings from the crank and cam sensors.
power balance test
Collapse
X
-
a power balance screen on the verus for the 2003-2007 6.0 diesels would be nice. the IDS machine will show this it"s a welth of information when working on these trucks. perdel readings on the 7.3"s has been one of the best added pid data readings snapon has gave us diesel guy's. the ids will do this on the new 6.4"s too. Im sure they are getting the readings from the crank and cam sensors.Hard Work, commitment, Honesty and not giving up is what Makes us better Tech's -
a power balance screen on the verus for the 2003-2007 6.0 diesels would be nice. the IDS machine will show this it"s a welth of information when working on these trucks. perdel readings on the 7.3"s has been one of the best added pid data readings snapon has gave us diesel guy's. the ids will do this on the new 6.4"s too. Im sure they are getting the readings from the crank and cam sensors.
Thanks in advance for your help.Jim MoritzComment
-
The 6.0 uses a linear EGR valve made by delco, so I would imagine the test verifies the desired position to the demanded position and the duty cycle or pulse width sent by the pcm. In puts to verify flow include map, exhaust back pressure and baro, this in turn affects the throttle plate position.Comment
-
I just looked it up and shop key calls it a propportional solenoid with a built in position sensor. I've not used ids so I'm notsure what the bidirectional is like. The codes P1334 and P1335 are out of position codes, code P1408 is a flow performance code. There's about ten possible EGR codes in all. A biderectional test (KOER) would allow you to monitor both desired position and watch map, exhaust back pressure and throttle position while cammanding EGR.Comment
-
there is a egr test in the IDS what it does is test a set of 6 differant test conditions of rpm,egrdc and vgtdc . It looks at map,maf,egrvp and ebp sensors. there is also a functional control test were you can command the egr valve from closed 0% to open 99% personaly i like the test that lets me command it open to close. a functional test that lets you open/close the egr valve is realy all you need.Comment
Comment