Snapon Diagnostics Product Forums Diagnostic Home . Diagnostic Product Index . Customer Care        
Diagnostic SoftwareDiagnostic PlatformsAsk-a-Tech, Automotive Repair InformationTech Central
Go Back   Snapon Diagnostics Product Forums > Member General Discussion Forum > General Discussions > US Member User Group
Home Today's Posts Register Members List FAQ
Thank you for visiting Snap-on Diagnostics Product Forums.
You are currently NOT logged in to a registered account. Some functions of Snap-on Diagnostics Product Forums will not be available to you if your are not logged in as a registered member. For a limited time only, registrationto Snap-on Diagnostics Product Forums to Snap-on Diagnostics Product Forums is !! FREE !! Select the    **REGISTER NOW**    link to register for your FREE Snap-on Diagnostics Product Forums account!!

Reply
 
Thread Tools Display Modes
  #1  
Old 06-03-2018, 05:11 PM
busaf4 busaf4 is offline
Junior Member
 
Join Date: Jun 2018
Location: NJ
Posts: 1
busaf4 Congratulations!  Your peers have given you enough reputation to put you into the fist level!

Default Sun LS2000 Scope

I have a Sun LS2000 scope in working condition. I am using it for ignition issues on points ignition system.
I can not figure out how to make the proper connections.

It appears that channel 1 should be the secondary pickup clip, black wire to ground, and a red wire to coil side of primary. However the sun wire assembly I have does not have the red wire to coil but dies have a black wire alligator clip. The meter end of the wire assembly is red and black (common) Picture attached


It appears that channel 2 is the trigger and uses an induction pick up on
spark plug #1 wire. The induction pick up has red and black(common) terminal on the meter. Picture attached

My question:

Do I need to get a one to two adapter so I can run a red wire to channel one

Or

Is there a wire assembly that contains a red, black, and clamp for the secondary wire to the distributor

Comments or suggestion greatly appreciated
Attached Images
File Type: jpg photo 1.JPG (52.1 KB, 16 views)
File Type: jpg photo 2.JPG (54.1 KB, 16 views)
File Type: jpg photo3.JPG (47.0 KB, 16 views)
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -7. The time now is 05:52 AM.


Reminder: Your participation in these areas of the site is solely at your own risk. The
information is only the opinion of the poster, is no substitute for your own research,
and should not be relied upon for business critical decisions or any other purpose.
Never assume that you are anonymous and cannot be identified by your posts.
We reserve the right to discontinue any users' use of any such public forum
for any reason. Please read the Terms of Service.

Snap-on is a trademark, registered in the United States and other countries, of Snap-on Incorporated. Other marks are marks of their respective holders.
©2009 Snap-on Incorporated. All rights reserved.