Snapon Diagnostics Product Forums Diagnostic Home . Diagnostic Product Index . Customer Care        
Diagnostic SoftwareDiagnostic PlatformsAsk-a-Tech, Automotive Repair InformationTech Central
Go Back   Snapon Diagnostics Product Forums > Snap-on Diagnostic Products > Diagnostic Platforms > SolusUltra User Forum
Home Today's Posts Register Members List FAQ
Thank you for visiting Snap-on Diagnostics Product Forums.
You are currently NOT logged in to a registered account. Some functions of Snap-on Diagnostics Product Forums will not be available to you if your are not logged in as a registered member. For a limited time only, registrationto Snap-on Diagnostics Product Forums to Snap-on Diagnostics Product Forums is !! FREE !! Select the    **REGISTER NOW**    link to register for your FREE Snap-on Diagnostics Product Forums account!!

Reply
 
Thread Tools Display Modes
  #1  
Old 05-31-2018, 03:23 PM
Glide Glide is offline
Senior Member
 
Join Date: Jan 2015
Posts: 149
Glide Made it to level 2!  Looks like you are on your way to becoming famous

Default a couple of bugs with 18.2

2015 Silverado 2500HD 6.6 .First 10 of sn 1GC2KVE87F.
Chassis control module is incorrectly listed as trailer brake control module.When I select trailer brake control module I can get module information,and codes,but when I select Data or special functions the list appears for a second and then loses connection with module.
This along with a P0606 that wouldn't complete was pointing me toward a faulty module.
I bought a GDS2 sub,verified that the module communicated fine and was in fact OK.
Second issue.2006 Pontiac G6 base 2.4 auto (I don't have the VIN).Base AM/FM/CD.Installed a used radio.Tried VIN relearn,"cycle ignition to complete" message appeared as normal,but after I cycled ignition nothing happened radio still displayed locked.Tried several times.Tried with Tech 2,worked fine.
I have replaced several radios in G6's of this vintage and unlocked with my Solus Ultra before with no issues,so this must be a 18.2 problem.
Reply With Quote
  #2  
Old 06-29-2018, 11:29 AM
Glide Glide is offline
Senior Member
 
Join Date: Jan 2015
Posts: 149
Glide Made it to level 2!  Looks like you are on your way to becoming famous

Default

2011 Hyundai Accent KMHCN4BC2B will not teach immobilizer keys.
When I enter the pin an asterisk appears beside the entered pin as if it is the wrong number and when I select OK it kicks me out.
I used the same pin with GDS and keys programmed fine.
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -7. The time now is 04:54 AM.


Reminder: Your participation in these areas of the site is solely at your own risk. The
information is only the opinion of the poster, is no substitute for your own research,
and should not be relied upon for business critical decisions or any other purpose.
Never assume that you are anonymous and cannot be identified by your posts.
We reserve the right to discontinue any users' use of any such public forum
for any reason. Please read the Terms of Service.

Snap-on is a trademark, registered in the United States and other countries, of Snap-on Incorporated. Other marks are marks of their respective holders.
©2009 Snap-on Incorporated. All rights reserved.