Hi folks, should have taken a sreen shot, was looking at a car last night, unable to get back to it for a short while, but she appears to be ruuning smooth at present.
The EPC light refers seemingly to the THROTTLE operation, and using 1 of the options in the vw programs i came across a pid screen with 4 lines of text & values.
I found with ign on eng off - throttle pedal to the floor the pedal voltages changed, BUT the 2 lines above were worded THROTTLE valve i think, these had values then when i fully pressed the throtte pedal, this value doesnt change, like i said, should have taken a screen shot, will do next time, we know there may be a map sensor problem (P0106) aswell, but curios to the throttle postion doesnt alter pedal movement according to the screenshot, may be it only shows on the screen when driving ? as the car is fly by wire etc, will reread this when im mobile again and update.
Also: code : 01314 engine control module no communication intermittent.
Any know of any common concerns for this code - clear, then recheck : gone, then pops back but does not activate any lights
The EPC light refers seemingly to the THROTTLE operation, and using 1 of the options in the vw programs i came across a pid screen with 4 lines of text & values.
I found with ign on eng off - throttle pedal to the floor the pedal voltages changed, BUT the 2 lines above were worded THROTTLE valve i think, these had values then when i fully pressed the throtte pedal, this value doesnt change, like i said, should have taken a screen shot, will do next time, we know there may be a map sensor problem (P0106) aswell, but curios to the throttle postion doesnt alter pedal movement according to the screenshot, may be it only shows on the screen when driving ? as the car is fly by wire etc, will reread this when im mobile again and update.
Also: code : 01314 engine control module no communication intermittent.
Any know of any common concerns for this code - clear, then recheck : gone, then pops back but does not activate any lights
Comment