ford cluster

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • bestdamgarage
    Member
    • Apr 2016
    • 99

    ford cluster

    will the ptp 3 do an 2008 tauras cluster it's on 2 buses one is the medium speed need to update so the fob part of the key will work on new keys per tsb08-11-11
    Last edited by bestdamgarage; 04-18-2016, 02:42 PM.
  • ToltecasChavez
    Senior Member
    • Apr 2011
    • 408

    #2
    Not sure what you wrote here bc it's a little confusing. Just so you know, any j2534 can program Ford cars as long as you buy a subscription from motorcraftservice.com You will be able to update modules or program new ones. If it's a new module, depending on the part, you may need to have 2 keys to do PATS right after. So yes, the PTP 3 can program anything in a ford. Good luck!

    Comment

    • bestdamgarage
      Member
      • Apr 2016
      • 99

      #3
      according to drew techs site for fords you can program all modules EXCEPT those on medium speed can and iso 9141 cluster is on medium and high speed can unless it just terminates there

      Comment

      • longhungsilver
        Member
        • Oct 2013
        • 82

        #4
        Yes medium speed can won't work on j2534. I'm unsure if the cluster will be programmable as it's on both networks. Id stay cautious and say no it won't work.

        Comment

        • bestdamgarage
          Member
          • Apr 2016
          • 99

          #5
          update it worked and i was able to erase and reprogram the keys and the fobs know work

          Comment

          • ToltecasChavez
            Senior Member
            • Apr 2011
            • 408

            #6
            Thanks for the update! Glad to hear everything worked out for you.

            Comment

            Working...