connect J2534 to PC

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • hieutrinh
    Junior Member
    • Jul 2014
    • 1

    connect J2534 to PC

    May I ask a question?
    If I would like to connect the J2534 to PC via Cat5 network cable, I connect to the network switch, router or direct to the PC?
    Thank for advise
  • dlm1
    Junior Member
    • Jul 2014
    • 23

    #2
    Not sure H, But I connect my Icom unit anywhere in my Network, at the pc or across the shop and see it, and it is accessible to Everything on my Network, thru a LAN cable. I have a couple of cisco box`s( Hubs) around the shop to connect to.

    It is all in the way your network is configured., if you have one.

    I would say directly to the pc you are using to flash with, if that is what you are attempting to do.

    Comment

    Working...