ZEUS Windows 10 upgrade new SSD & 4gb ram

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Signature
    Junior Member
    • Jan 2020
    • 5

    ZEUS Windows 10 upgrade new SSD & 4gb ram

    Upgraded SSD to 1TB and ram to 4gb (see pics).
    Cloned drive with Acronis results in 700+gb drive C & 180+gb drive D.
    Boots up & runs all including updates perfectly on Win7.
    Copy license file & drivers folder to drive D.
    Try installing win10pro32bit via boot flash, format drive C & install Win10.
    Install all drivers & enable NET 2.0 . / 3.5 in windows features.
    Device manager perfectly clear.
    Tried installing diagnostic suite & always end up with 1 error at the end & because of error, I can never launch suite as i get a hardware initialization failure.
    Scope driver seems good.
    Something to do with that task button xml.
    Any help would be greatly appreciated.


    Discover the magic of the internet at Imgur, a community powered entertainment destination. Lift your spirits with funny jokes, trending memes, entertaining gifs, inspiring stories, viral videos, and so much more from users.

    Discover the magic of the internet at Imgur, a community powered entertainment destination. Lift your spirits with funny jokes, trending memes, entertaining gifs, inspiring stories, viral videos, and so much more from users.
    Last edited by Signature; 02-07-2020, 09:34 AM.
  • ToltecasChavez
    Senior Member
    • Apr 2011
    • 409

    #2
    Not sure if there's any difference, but from what I read, it's suppose to be Windows 10 embedded not Windows 10 32bit? Again, I'm not sure, but maybe that could be where the problem lies? Either way, hopefully you can get this sorted out.

    Comment

    • Signature
      Junior Member
      • Jan 2020
      • 5

      #3
      Originally posted by ToltecasChavez
      Not sure if there's any difference, but from what I read, it's suppose to be Windows 10 embedded not Windows 10 32bit? Again, I'm not sure, but maybe that could be where the problem lies? Either way, hopefully you can get this sorted out.
      Tried that with same result.

      Comment

      • tech25
        Senior Member
        • Oct 2017
        • 172

        #4
        what SW version are you running??
        snap on just release another service release for 19.2 for the windows scan tools
        now 19.2.2 is the latest.

        the update says they included Microsoft .NET V 4.8.

        maybe a issue???

        Comment

        • Signature
          Junior Member
          • Jan 2020
          • 5

          #5
          Originally posted by tech25
          what SW version are you running??
          snap on just release another service release for 19.2 for the windows scan tools
          now 19.2.2 is the latest.

          the update says they included Microsoft .NET V 4.8.

          maybe a issue???
          Was trying W10 update from a 19.2 image.

          Put old image (Win7 Embedded) back on and noticed a bunch of updates that just came thru including NET 4.8.

          May try to image SSD again from current 19.2.2, copy license + drivers folder to D then format C and install Win10 LTSC. I then install all drivers & make sure device manager is clear of faults. Install DIAG suite, copy license back to C then reboot.

          Comment

          • tech25
            Senior Member
            • Oct 2017
            • 172

            #6
            sounds like a good plan.. let us know the results

            Comment

            • ASEMASTER
              Junior Member
              • Aug 2019
              • 9

              #7
              We need an updated shopstream update tool for windows 10. I updated my verus edge and that is the only issue im having.

              Comment

              • Signature
                Junior Member
                • Jan 2020
                • 5

                #8
                Originally posted by tech25
                sounds like a good plan.. let us know the results
                It didnt work
                If anything, I had another error in addition to the 1st one.

                32bit OS & x64 processor? Zeus CPU is 64bit? Should I install 64bit LTSC?

                Last edited by Signature; 02-07-2020, 09:32 AM.

                Comment

                • ASEMASTER
                  Junior Member
                  • Aug 2019
                  • 9

                  #9
                  Originally posted by Signature
                  It didnt work
                  If anything, I had another error in addition to the 1st one.

                  32bit OS & x64 processor? Zeus CPU is 64bit? Should I install 64bit LTSC?

                  https://imgur.com/untajbD
                  I think diagnostic suite only works with 32 bit

                  Comment

                  • tech25
                    Senior Member
                    • Oct 2017
                    • 172

                    #10
                    that sucks, well, i think if you send in the zeus snap on is upgrading to win10 but you have to pay for it, around $ 250 I think.

                    then in theory, just do a straight clone of that to the upgraded 1 TB SSD and you should be good.

                    other than that, sorry, im at a end.

                    Comment

                    • Signature
                      Junior Member
                      • Jan 2020
                      • 5

                      #11
                      turned on net 2 / 3.5 & legacy components - now back to 1 error on install. The snapon button task error.
                      its prob something really stupid but, I'll never know.
                      How cool would it b for tech support to chime in with a solution?

                      Comment

                      • ronald316
                        Member
                        • Oct 2018
                        • 46

                        #12
                        Originally posted by Signature
                        turned on net 2 / 3.5 & legacy components - now back to 1 error on install. The snapon button task error.
                        its prob something really stupid but, I'll never know.
                        How cool would it b for tech support to chime in with a solution?

                        i saw a video on you tube a guy updating is verus to windows 7 .and i sent a message to him and he said wind 10 installs the same.haven t tried it yet hope this helps

                        Comment

                        • speedracer68
                          Junior Member
                          • Sep 2015
                          • 2

                          #13
                          zeus Win 7 to Win 10 Enterprise

                          So i been reading all the port of updating a Zeus and Verus. I was able to clone my original hard drive on my Zeus and pilot it over to a 256G m2nvme SSD. loaded windows 10 enterprise no problem. manage to load everything else i get 2 errors, one is known which is the S button, but windows 10 loads its own driver for the button which works will. diagnostic suite and shop stream connect are the two i have issues with. so for now i am back to Win7 embedded until i can figure out what i missed. I believe its because the serial number and name of device is not showing due to missing license file. License is not in the same as the Verus.

                          any assistant would be appreciative.

                          Comment

                          Working...