I just started using a scope. having a lot of problems getting good waveform on the screen. If anyone could help please do.
using vantage pro
Collapse
X
-
A scope is a voltmeter that also displays TIME so try changing your time settings. The Vantage-Pro also has lots of preset test configurations so use them. That's one reason the machine will ask you to ID the vehicle.
As a true "scope", the V-P isn't the best but as a complete combination it is really very good. I havn't had any need for a more elaborate "scope" than my V-P.
Also there are some SnapOn training modules...
They're linked on this site.
HTH -
I'm going to have to agree with Mark on this one. This is a phenomenal tool, especially the ability to pull up the car and component. However, Snap On was quick to update the Solus Pro to the Ultra, and now update the Verus to the Verus Pro, just waiting for an upgrade to the Vantage Pro. Maybe a larger screen, and ?? What other upgrades do you guys think would be beneficial to this tool? More channels perhaps? 4?"If you aim for nothing, you'll hit it every time!"
Zig ZiglarComment
-
Comment
-
sully2007
Can you clarify "not getting a good waveform"
do you see a waveform on the screen? Are you using the trigger to hold the waveform so you can view it? Is your concern that your image looks fuzzy when compared to similar waveforms from other products like the Verus, Modis, or Verdict models? The Vantage Pro does not have the screen resolution of the higher end scopes. The Modis is not as clear as a Verus Pro but it is still a great tool just like the Vantage Pro.Comment
-
I'm in this same boat. I got a used one off the truck and I can't figure out what leads to use to setup everything. Twice I've wanted to scope a primary O2 sensor and see if it's bias, etc.. and I can't get it to display a good pattern.
Comment
-
Have you tried IDing a car and using the preset tests? It will help you get started.Comment
-
Sully & Gravy,
Skip is right. You don't have a scope problem. You have a training problem. The best suggestion I would offer would be to take some classes revolving around scope usage, preferably something specific to your tool. Start with Snappy's own training here: http://www1.snapon.com/diagnostics/u...ns/Courses.htm
Then I would recommend Paul Danner's YouTube channel since he uses the Snap On equipment frequently, and typically gives a good description of what he's doing, as well as why he's doing it. http://www.youtube.com/user/ScannerDanner
I always recommend spending some time at Autonerdz.com for geeking out on waveforms. You just have to realize that site is primarily for PicoScope users, so you may not get Snap On specific help, but you can learn a lot about scope usage and set up.
Also, in the past, I heard good things about Travis Dewitz's manual here: http://www.dewitzdiagnosticsolutions...ining-manuals/Comment
Comment