Hi all I've noticed since couple of months,engine ecu data on solus pro 11.4 is getting shorter and shorter,for example on Renault cars or today on BMW 5 series.
Basically I've got BMW 520d engine 204D4 with DPF faults.
Went to engine data to see some exhaust related PIDs but I was very suprised
THERE IS NONE!
Solus Pro gives me instructons for DPF regen drive cycle but as pre requisite it wants me to see exhaust temp pre catalyst, OK but it is not covered in data.
NO Exhaust gas temp from both sensors
NO Exhaust backpressure
NO Lambda
NO Accelerator position (could not believe)
NO DPF regen request status
NO DPF regen active
Well I had to use KTS at the end and It is all there.
I'm not happy because if we didn't have kts I couldn't do anything to diagnose this with my solus pro.
I work quite a lot on renault cars and noticed that on some cars there is only 10 or12 PIDs to read,honestly there is more under EOBD.
Is Solus pro running out of memory space?
Comment