Unavailable Controllers 2014 Nissan Murano

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • phill57
    Senior Member
    • Oct 2007
    • 474

    Unavailable Controllers 2014 Nissan Murano

    Working on a 2014 Nissan Murano VIN JN8AZ1MW0EW507925 with Verus Pro 17.2 software and performed network scan which identified 14 controllers and a code in the HVAC controller B2631 Sun Load Sensor. When I go back to the System Selection screen only 10 systems are available to scan and the HVAC system controller is not listed yet is was scanned and the code was pulled during the All DTC Scan. Also missing is the Auto Back Door, Around View Monitor and AWD Controller. The All System DTC clear reports codes cleared on 14 controllers as well. It's difficult to diagnose the HVAC without data and other tests.

    Here is a video link: https://www.youtube.com/watch?v=2etZZugDZXI

    Tried ID'ing as a 2015 and the HVAC controller is listed and diagnosis seems to work as it reports the same code, has a data list that looks normal and some bidirectional tests. The other controllers are also listed on the 2015 and access to them seems to work as it should.
    Attached Files
  • Steve6911
    Moderator
    • Feb 2007
    • 2168

    #2
    I will forward your post to the correct people

    THANK YOU!

    Comment

    Working...