Mode $06 that works right.
Collapse
X
-
-
-
MasterWrench
Not sure if its the same on the modis as the SP but the bar graph at the top of the memory shows how much room is available. Opposite of what one would think. The modis may be the same
SamComment
-
Guess I need to pay more attention. I'll look at it and see what it actually says....MasterWrenchComment
-
I tried to save a couple screen shots and a scope movie to my cf card. When I looked at my cf card this is what was there:
LSPI Module
11/5/2007 13:42:14
ERROR 9003 - Failed to handle menu selection. eNavKey(1), nNodeKey(2700), lRet(-2147467263)
CModisView::CallHandleMenuSelection
11/5/2007 13:42:14
AI_SENDMSG HandleMenuSelection call failed for navKey(1), nKey(2700), compType(6), LineNo(3420)
CTibComponent::SetNavigationState
11/5/2007 13:42:28
Invalidate CompState(4), LineNo(656)
LSPI_Hardware
11/5/2007 13:42:29
ERROR H505 - The driver file is not open.
LSPI_Hardware
11/5/2007 13:42:29
ERROR H1002 - Unable to send a command to the driver.
LSPI_Hardware
11/5/2007 13:42:29
ERROR H1116 - Unable to get waveform from scope driver.
LSPI_Hardware
11/5/2007 13:42:29
ERROR H1208 - Unable to read waveform screen from scope hardware.
LSPI Module
11/5/2007 13:42:29
ERROR 6106 - Unable to acquire waveform screen from scope hardware. retCode(0x80004005)
LSPI Module
11/5/2007 13:42:29
ERROR 8209 - Unable to get waveform screen in Scope Hardware. retCode(0x80004005)
LSPI Module
11/5/2007 13:42:29
ERROR 2205 - Do Live failed.
CPageProcessorr::GetComponentBySectionId
11/5/2007 16:16:15
no component exists for sectionId(5) is NULL, LineNo(1259)
CPageProcessor::TransitionComponentState
11/5/2007 16:16:15
tibComp passed is NULL, LineNo(1434)
CPageProcessor::ResizeScopeScreen
11/5/2007 16:16:15
TransitionComponentState failed, LineNo(2146)
CPageProcessorr::GetComponentBySectionId
11/5/2007 16:18:25
no component exists for sectionId(5) is NULL, LineNo(1259)
CPageProcessor::TransitionComponentState
11/5/2007 16:18:25
tibComp passed is NULL, LineNo(1434)
CPageProcessor::ResizeScopeScreen
11/5/2007 16:18:25
TransitionComponentState failed, LineNo(2146)
CPageProcessorr::GetComponentBySectionId
11/5/2007 16:19:16
no component exists for sectionId(5) is NULL, LineNo(1259)
CPageProcessor::TransitionComponentState
11/5/2007 16:19:16
tibComp passed is NULL, LineNo(1434)
CPageProcessor::ResizeScopeScreen
11/5/2007 16:19:16
TransitionComponentState failed, LineNo(2146)
Any ideas??MasterWrenchComment
-
You know I got a lot of similar stuff on my CF card for my Solus Pro, I have no idea what happen. Just tried to save all pages if I remember right.
But I do know Shop Stream Connect does not like it, it throws a hissy fit.Comment
-
That is what I did, Save all pages of scope movie and just a bitmap of the main menu screen is all....MasterWrenchComment
-
My Sony is a 1G
Memorex is a 2G
PNY is an 8G, but I had a 4G that wouldn't work either.
Nick, a thumb drive is a small flash-memory hard drive that plugs in the USB port. They're small, fast and hold a ton of info. I keep my entire laptop backup one one attached to my keychain. They're pretty handy.
Joe"You don't build a reputation on what you're going to do"
Henry FordComment
-
Well this has nothing to do with a tool working right with Mode 6 but a great way to help understand it better. Nick, one of this forums Moderators works for a training company that sells a great book on it. I have used Mode 6 for several years now, read up on it A LOT to get a grasp on it and this book still showed me things I had no idea about. Strategies that the PCM uses, criteria?s etc all in easy to understand language. Here is a link to this great book. http://www.autotechdiagnostics.com/books.html Thanks Nick!
SteveComment
-
My Sony is a 1G
Memorex is a 2G
PNY is an 8G, but I had a 4G that wouldn't work either.
Nick, a thumb drive is a small flash-memory hard drive that plugs in the USB port. They're small, fast and hold a ton of info. I keep my entire laptop backup one one attached to my keychain. They're pretty handy.
Joe
I know what a thumbdrive is. I was considering offering to buy it off of MW. I already have 3 1 gigers! I use them for going between my laptops or desktops.Comment
-
Well this has nothing to do with a tool working right with Mode 6 but a great way to help understand it better. Nick, one of this forums Moderators works for a training company that sells a great book on it. I have used Mode 6 for several years now, read up on it A LOT to get a grasp on it and this book still showed me things I had no idea about. Strategies that the PCM uses, criteria?s etc all in easy to understand language. Here is a link to this great book. http://www.autotechdiagnostics.com/books.html Thanks Nick!
Steve
Thanks for the plug Steve!! It is a great class and a great book! I have more!Comment
-
Oh well. Back to kindergarten for me....
Joe"You don't build a reputation on what you're going to do"
Henry FordComment
-
Comment
Comment