![]() |
Diagnostic Home . Diagnostic Product Index . Customer Care |
|
You are currently NOT logged in to a registered account. Some functions of Snap-on Diagnostics Product Forums will not be available to you if your are not logged in as a registered member. For a limited time only, registrationto Snap-on Diagnostics Product Forums to Snap-on Diagnostics Product Forums is !! FREE !! Select the **REGISTER NOW** link to register for your FREE Snap-on Diagnostics Product Forums account!! |
![]() |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
![]() Good day, I have a 2014 Jeep Grand Cherokee 3.0 Diesel in my shop with a fault code says injector 2 Timing not the same as other injectors. I have tested the injector at a diesel injection shop and tests okay. Swapped injector 1&2 and fault still says injector 2. Checked wiring to ECU and resistance on harness from injectors to ECU and tests okay. Checked pins on ECU plug and all look good. Please can you advise if there are any other checks I may have missed to diagnose this fault.
Any advice will be greatly appreciated. Last edited by WesternElectric; 09-18-2018 at 12:30 PM.. Reason: Added info |
#2
|
|||
|
|||
![]() Can you post the code number?
|
#3
|
||||
|
||||
![]() perform a relative compression test, make sure that cyl #2 has good compression.
|
#4
|
|||
|
|||
![]() Hi the fault code is P020B-00
|
![]() |
Thread Tools | |
Display Modes | |
|
|