1994 Mitsubishi 3000GT Help

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Ricemiester
    Junior Member
    • Jan 2010
    • 3

    1994 Mitsubishi 3000GT Help

    The car is a friend of mines who doesn't make much money so Im trying to help him out. The car will go in reverse but not drive. If you leave the key on and shift the gears, reverse "buzzes" in the transmission only for a second while D, 2, and 1 buzz continuously. I plugged in my Solus and i can only communicate with the engine and read the data, when i tell it to read trans it doesn't detect it. I checked all fuses, they're good. Any Ideas? Any input would be much appreciated thanks.

    Oh also when i put in the VIN it said to use the Mitsu 1 adapter but it has an OBD II plug and it gives a message not to use the 12 Pin I don't know if there is a plug I'm not seeing or supposed to use the adapter.
  • rocknpunkdad
    Junior Member
    • Mar 2007
    • 14

    #2
    Use the MITSU-1 adaptor and don’t hook up the 12 pin old style connector on adaptor.
    Are you on Ask A Tech? If not I can give you a subscription to try it out.
    You can reach more techs on that, then here.


    Wayne

    Comment

    Working...