hi im hoping someone will be able to help me , i bought a solus scanner on the internet that is faulty, all it did was bleep and nothing more on further investigation the battery terminal was very corroded after a clean up i now get a bleep and a blue screen when using batteries nothing with a power supply. another thing is i only bought the base unit no cards , leads etc. i bought a power lead but there is no cf card , where can i obtain one from or is it worth my while doing this as im not sure wether it will work properly. i thank you in asdvance if anyone can help.
solus EESCGB310
Collapse
X
-
Tags: None
-
hi im hoping someone will be able to help me , i bought a solus scanner on the internet that is faulty, all it did was bleep and nothing more on further investigation the battery terminal was very corroded after a clean up i now get a bleep and a blue screen when using batteries nothing with a power supply. another thing is i only bought the base unit no cards , leads etc. i bought a power lead but there is no cf card , where can i obtain one from or is it worth my while doing this as im not sure wether it will work properly. i thank you in asdvance if anyone can help.
Sounds like you may have a "bricked" unit. I would try to inquire with your local snap-on tools distributor to see what can be done.Comment
-
i bought it cheap as a non worker to see if i could get it going . it just beeped once when i got it but ive got it to light up after the beep now for a few seconds. if i get it going its a bonus but ive not spent hundreds on it just pounds so its worth a go to fix it for me and if it works ill invest in other parts for it. its being powered by battery at the minute . it was badly corroded but ive cleaned that upComment
-
Comment