Snapon Diagnostics Product Forums Diagnostic Home . Diagnostic Product Index . Customer Care        
Diagnostic SoftwareDiagnostic PlatformsAsk-a-Tech, Automotive Repair InformationTech Central
Go Back   Snapon Diagnostics Product Forums > Snap-on Diagnostic Products > Diagnostic Platforms > Vantage PRO User Forum
Home Today's Posts Register Members List FAQ
Thank you for visiting Snap-on Diagnostics Product Forums.
You are currently NOT logged in to a registered account. Some functions of Snap-on Diagnostics Product Forums will not be available to you if your are not logged in as a registered member. For a limited time only, registrationto Snap-on Diagnostics Product Forums to Snap-on Diagnostics Product Forums is !! FREE !! Select the    **REGISTER NOW**    link to register for your FREE Snap-on Diagnostics Product Forums account!!

Reply
 
Thread Tools Display Modes
  #1  
Old 03-10-2017, 08:54 AM
louie louie is offline
Junior Member
 
Join Date: Dec 2016
Location: Dayton, Ohio
Posts: 2
louie Congratulations!  Your peers have given you enough reputation to put you into the fist level!

Default VP pressure transducer rotary compression

Has anyone used the Vantage Pro pressure transducer to check the compression on a rotary engine? I work on them from time to time and it should be pretty easy using the pressure transducer. Buying an aftermarket rotary engine compression tester is pretty expensive, but since I already have the VP it should be easy. I have the 5000 psi transducer, so I may need the 500 psi transducer. Thanks
Reply With Quote
  #2  
Old 03-10-2017, 01:30 PM
Witsend Witsend is offline
Senior Member
 
Join Date: Nov 2012
Posts: 2,656
Witsend Made it to level 2!  Looks like you are on your way to becoming famous

Default

Think you would expect to see 3 compression strokes for each rotation of a rotor.
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -7. The time now is 05:15 AM.


Reminder: Your participation in these areas of the site is solely at your own risk. The
information is only the opinion of the poster, is no substitute for your own research,
and should not be relied upon for business critical decisions or any other purpose.
Never assume that you are anonymous and cannot be identified by your posts.
We reserve the right to discontinue any users' use of any such public forum
for any reason. Please read the Terms of Service.

Snap-on is a trademark, registered in the United States and other countries, of Snap-on Incorporated. Other marks are marks of their respective holders.
©2009 Snap-on Incorporated. All rights reserved.