verdict component test meter and cursors

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • leemack
    Member
    • Jul 2010
    • 49

    verdict component test meter and cursors

    Is It possible to use cursors when using component test meter rather than scope. When viewing ecu scan data and using component test meter I wanted to measure duty of a heater control valve more accurate to compare with live data.

    Thanks
    Lee
  • IDT7
    Member
    • Dec 2009
    • 75

    #2
    I don't think it is possible on verdict,

    Comment

    • Rich Shepherd
      Snap-on D&I
      • Nov 2006
      • 553

      #3
      Originally posted by leemack
      Is It possible to use cursors when using component test meter rather than scope. When viewing ecu scan data and using component test meter I wanted to measure duty of a heater control valve more accurate to compare with live data.

      Thanks
      Lee
      Turn them on before you use the Meter button on the top toolbar to undoc the meter to a separate window that will display with scanner. The top toolbar with the cursor button is not in the meter window when it is undoced from the CTM so you need to display them before you do that.

      Comment

      • leemack
        Member
        • Jul 2010
        • 49

        #4
        Thanks for that Rich,

        I'll give it a try next time.

        Comment

        Working...