m2 and d7 not pairing togather, s3 will pair!

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • bigno
    Junior Member
    • Aug 2013
    • 3

    m2 and d7 not pairing togather, s3 will pair!

    I just bought a scope module for the verdict, and it will not pair with main unit, the scanner module does but only with the cable to d7, any advise anyone? thanx
  • Joe Rappa
    Snap-on DSD
    • Aug 2007
    • 2050

    #2
    Any chance you didn't have the meter in Bluetooth Mode?

    Joe
    "You don't build a reputation on what you're going to do"
    Henry Ford

    Comment

    • sandt38
      Senior Member
      • May 2012
      • 187

      #3
      Not sure about the scope module, but the scan module may need an update. Plug the USB cable into the units and start any updates available.

      Comment

      • bigno
        Junior Member
        • Aug 2013
        • 3

        #4
        yes, i had the scope module on bluetooth, and paired the scan module again, but i had to pair the scan and d7 with a cable, no spot for a cable for the scope module, the other thing, when the scope mod was turned to bluetooth sometimes it would show a pic of it trying to transmit and other times it would be a black screen, and would not turn off when switched, you have to unplug the battery pack. defective scope module maybe? the d7 and s3 are used but the m2 scope module is new, i bought the scope module separate.

        Comment

        • bigno
          Junior Member
          • Aug 2013
          • 3

          #5
          everything is up to date

          Comment

          Working...