If this is your first visit, be sure to
check out the FAQ. You may have to register
before you can post: click the register link to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
SSC 9.1.0.26 will not open a .scp file (PID triggered snapshot).
A version is being tested that will open a .scp file and should be available within about 2 weeks.
You can still view .scp files on the tool they were captured.
Also remember that the scanner is always capturing data. Up to 2000 points per PID. If you press Pause at any time, the data captured up until that moment will be in the data buffer and can be reviewed or saved to a file (.scm) which can be opened by SSC 9.1.0.26.
Once the buffer is full and has reached 2000 points, it continues to capture data. For each new point captured, the oldest point is deleted to make room for the new one. From this point forward, any time you press Pause, you will have the last 2000 points per PID available for review which can be saved to a file using the save button on the top toolbar.
Comment