Okay guys, so I'm going to to post all 11 steps of the Snap On Functional Testing on a 2001 Toyota Camry. A little history on this car before we get too deep into the JPEG's. First, we replaced a Charcoal Cantister with switching valve that is placed on the canister 3 years ago. Customer came back last month, proceeded to smoke test to find a bad gas cap. Did a vacuum test while cycling solenoid(per Toyota testing procedures) On the Canister Closed Valve (mounted on airbox), and also on the Purge Valve. Neither of these failed during test, held vacuum and cycled properly over a dozen times each. So, after cap, vehicle came back last week. Smoke test again, found nothing, but then started to test Switching Valve mounted on Charcoal Canister. Noticed slight vacuum leak while cycling valve open and closed, so we replaced another Charcoal Canister w/Switching Valve. I proceeded to run the 11 Step test, and here's my results:
Gut Feeling says this will be back...
Gut Feeling says this will be back...
Comment