hi im new to all this and i have just purchased a new solus ultra and i want to no step by step how to turn the seat belt chime off on my car.
audi a4 b7 seat belt chime remove
Collapse
X
-
Tags: None
-
Pardon me if I Chime in ,but I just don't believe you can defeat a warning chime related to safety with any scan tool. The Solus might be able to activate the chime and the seat belt light on to test that it works .Best to diagnose why it's on if customer is actually wearing the seat belt or buy a seat belt extension or trade it in for a Fat Man's car like a Cadillac with a little more length to the belt for people of large girth. Do what you got to do if it's the wife though, but realize you're technically still liable if you put duct tape around either one.Last edited by Witsend; 07-20-2014, 05:18 PM. -
No help what so ever
Do you not have anything else to do with your time.
You must be really bored.Comment
-
You'll have to pardon WITSEND. We believe he posts while intoxicated. He does post good info, and is always helpful. He just does it with a crooked grin, and lots on extra info, as can be seen here.
On almost every car on earth, he is correct though. Scanners don't have access to that kind of programming. The exception is VW/Audi though. If It remember correctly, this can be done, but you'd better know what you are doing before you attempt it. The info can't be found on this website though. Try Audiforums.com or maybe another similar site. If I recall correctly, some of them can done without issue, but others can only make that change as part of a group of changes, like disable the chime and it also turns the key alarm off too, and changes the dash to metric....or something like that.
You'll need to go into the Euro software and then into Expert Mode. Be careful what you change. Mess with the wrong thing and you turned your computer into a brick.
Joe"You don't build a reputation on what you're going to do"
Henry FordComment
-
Comment
-
I'm wondering if you do find the way to turn off the warning features , when the time comes when the battery is removed they might just pop back by default and need be dealt with again.
How many "Clicks" does it take get to the center of a " Tootsie Roll-over?"
Last edited by Witsend; 07-21-2014, 11:21 AM.Comment
-
I've now got it sorted thanks wasn't that bad to do. but it really is hard to find this kind of info for snap on tools.
I haven't had the battery off yet so don't no if it will go back to default or not.Comment
Comment