hi guy hope someone could help have a 2000 a3 1.6 (avu) idie problem and need help with the vag system.
Iv done all the normol things cleaned throttle body and check maf, the reading i done says it should idle at 650 -750 rpm but it in the low 550 /610 rpm
So it has been said that you can go in to the vag system and set idle but i dont know the chanal or blocks and just dont want to go in blind
I using the solus pro
Any help would be granty taken
Oh yes checked vac. Pipes and the thermstat
And just so you know the problem is, in first and rev. as you putaway the rpm down so low it stalls, sits fine
Thank again for your time and help
Iv done all the normol things cleaned throttle body and check maf, the reading i done says it should idle at 650 -750 rpm but it in the low 550 /610 rpm
So it has been said that you can go in to the vag system and set idle but i dont know the chanal or blocks and just dont want to go in blind
I using the solus pro
Any help would be granty taken
Oh yes checked vac. Pipes and the thermstat
And just so you know the problem is, in first and rev. as you putaway the rpm down so low it stalls, sits fine
Thank again for your time and help
Comment