Hi there, I was wondering if anyone had any advice for me, I have a 2001 Honda HRV petrol in with the ABS light on and the customer complaining of the brake pedal thumping back up to them when braking. I can get into the ABS system and it communicates ok, it brings up the following options in the ABS menu :
1 - Codes (NO CODES)
2 - Display Codes
3 - Erase Codes
There is obviously a code or fault in the ABS system but it will not let me select any of the options. I can scroll over them but it will not let me select on any of them. If I go into engine it gives me the same options and also says no codes but it will let me select the above options and rescans for any fault codes. I am using the Solus Pro with 9-4 software.
1 - Codes (NO CODES)
2 - Display Codes
3 - Erase Codes
There is obviously a code or fault in the ABS system but it will not let me select any of the options. I can scroll over them but it will not let me select on any of them. If I go into engine it gives me the same options and also says no codes but it will let me select the above options and rescans for any fault codes. I am using the Solus Pro with 9-4 software.
Comment