So I have now had 2 problems programming Toyota anti-theft. One was a 2007 toyota 4runner and the second one was a 2011 toyota avalon. After doing Full reset of anti-theft, converting seed to passcode and waiting the 16 minutes, the antitheft light stays on, I cycle the key 4 times as per the instructions, light goes out, but crank and it starts then dies off. I check the DTC on engine and its the same dtc that the PCM has before programming antitheft. B2799. The antitheft light never blinks but the dtc won't go away and car no start. I have done this using the china cable and also my CarDAQ- Plus 2. And both have failed after trying 3 times each. Wait 16 minutes, cycle key, antitheft light goes off, Crank but No Start. This is a china cable(But I use CarDAQ Plus 2 as well) and techstream that I have does not connect to toyota servers but I have done other older toyotas using this techstream and it
In both cases I called another guy who has the original techstream and pays for the service. He has done both cars succesfully in 15 minutes. My question is, does toyota need server communication to do certain cars? I have programmed antitheft toyota that are 2003-2005 with no problem. Any ideas? Sorry for the long post.
In both cases I called another guy who has the original techstream and pays for the service. He has done both cars succesfully in 15 minutes. My question is, does toyota need server communication to do certain cars? I have programmed antitheft toyota that are 2003-2005 with no problem. Any ideas? Sorry for the long post.
Comment