Hey guys I just picked up a Vantage Pro cheap off the Snap On Guy. It looks like it has never been used. What do I need to test KV's. All I have are the standard leads. Thanks.
Just picked up a Vantage Pro
Collapse
X
-
Tags: None
-
KV's
Hi you need the primary inductive rpm pick up and a Snap-on Secondary Ignition Clip on Wire Adapter. Snap-on Secondary Ignition adapter cable for starters. There is a more expensive SIA 2000 dis system as well. Hope this HelpsLast edited by hefaus; 09-22-2010, 09:23 PM. -
pic 1 eeta309a05a
pic 2 eetm303a05a
pic 3 eetm306a02Last edited by hefaus; 09-23-2010, 01:26 PM.Comment
-
Vantage pro kv adapters
I also just purchased a vantage pro i dont know what you paid for yours but mine wasn't jeep,iam also interested in checking kv voltage i will start with those and add others as i go.Without those we cant do any kv testing.Did you order any and are you now checking kv voltage?Comment
-
I also just purchased a vantage pro i dont know what you paid for yours but mine wasn't jeep,iam also interested in checking kv voltage i will start with those and add others as i go.Without those we cant do any kv testing.Did you order any and are you now checking kv voltage?
You will need to pick up an Ignition Scope Lead Kit if you want to test Kv voltage. Here is the part number EAK0294B09A
You might also need to pick up a coil on plug adapter (COP) there are several to choose from depending on manufacturer application.
Here is the link to the catalog https://buy1.snapon.com/catalog/cata...ol=diagnostics
Hope this helps
JayComment
Comment