If this is your first visit, be sure to
check out the FAQ. You may have to register
before you can post: click the register link to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Not sure if this has been posted before but you can capture the signal from a digital MAF on the Vantage Pro by using frequency.
This capture is from a Vauxhall Insignia.
Yes it does, its an A20DTH turbo diesel engine. This was a capture of snap throttle that i grabbed when i was carrying out Pre Delivery Inspection on the vehicle.
Noticed you also have a Picoscope and if its a 4000 series then with the latest software they have also added a frequency tab to the options now on the AC/DC drop down. This will only work on the 4000 series scopes and not the earlier 3000 series.
Comment