Okay guys I'm working with a Solus Pro, 11.4. Got a key fob for an '01 Olds Aurora= 1G3GR64H51414XXXX. I know I could program key fobs when I had 12.4 on my Modis, but I'm not finding it in 11.4. Will this need a Tech2 or an update on my Solus Pro to 12.4 or higher?
GM Key Fob Reprogram
Collapse
X
-
Okay so 13.4 has it in functional tests, and I can pull module info and check for codes. However, when I got to program key fobs, it's says "an error occurred"
"Read object/ program key fobs class2 RFA MACHINE1) protoID 0x000.
Is this a scan tool problem or a module issue?"If you aim for nothing, you'll hit it every time!"
Zig ZiglarComment
-
interesting that the launch wont do it..thats what i use over here..cant see the american cars being much different.
looks like it could be a software error on youre snappy...would be interesting to see if another tool can do it before you try the tech2.Comment
-
Are you sure you can't add a remote without using the scan tool??? Like this...
Aurora - '01 Aurora keyless programming - I've searched on google and found about 3 different ways to do it, none of which work. Does anyone know how to do it for real?? TIA Dan
This is 1 of the reasons I have retained my Tech2.Comment
-
I tried this link that you posted...no luck! But some of the guys on there said that the timing has to be exact. I'll either upgrade the S Pro to 14.2 or find a Tech2. Thanks for the help"If you aim for nothing, you'll hit it every time!"
Zig ZiglarComment
-
Okay one more piece of info on this. I tried my dealer's Solus Ultra 13.4 and it said the same "error machine" message. Hard to think two different platforms have the same problem.... Probably a dead link in the software???????
Maybe I should post this under a Bug Report for Solus Platforms, what do you guys think?"If you aim for nothing, you'll hit it every time!"
Zig ZiglarComment
Comment