Originally Posted by GypsyR
2008 Silverado 2500 HD with a 6.6 and Allison 1000. Had a P0708 for MLPS. ATSG has a bulletin where one should compare the actual reading of the MLPS to what the TCM sees because apparently there are TCM issues you don't want to blame on the MLPS. Or vice-versa.
Fine. The bulletin includes a parity chart so I can read the data and compare the actual shifter position with the chart. An updated Zeus does not see fit to show me that data though. If it's there I can't find it. Back in the troubleshooting section somewhere is that same handy parity chart but with no actual data to compare it with anywhere. Really?
At some point I'll get back to this and see if one of the other scanners can read MLPS data but we are suspecting it to be a TCM issue as it seems fairly common.
Are you able to read the other trans data? had a few tcm"s that would not read data or run any functional test. these were the tcm module not the scanner, just asking.