TPMS3 problems

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • planenut_2000
    Junior Member
    • Jan 2016
    • 5

    TPMS3 problems

    I have a newer tpms3 tool that isn't allowing me to do the ecu relearn on all the imports.
    The tool recognizes the obd2 module when it's connected, but when i attempt the relearns i always get communication failures with the cars. It was working a couple of months ago. The problem started before the last update and the latest update didn't help.
    Is there any failure history with the obd2 modules?
    Any ideas?
  • STURNER
    Member
    • Oct 2014
    • 91

    #2
    Did you update the obd2 module? I had the same problem after my update and it was because there was no mention that the module had to be updated as well. Called the hotline and they said it happens all the time.

    Comment

    • planenut_2000
      Junior Member
      • Jan 2016
      • 5

      #3
      How do you update the obd2 module?

      Comment

      • STURNER
        Member
        • Oct 2014
        • 91

        #4
        After the update is completed on the tpms3, plug in the module and the update should continue automatic. It's been a while, hope I'm remembering right.

        Comment

        • planenut_2000
          Junior Member
          • Jan 2016
          • 5

          #5
          but when i take it out of the docking station, won't that end the programming?

          Comment

          • Steve6911
            Moderator
            • Feb 2007
            • 2168

            #6
            Call tech support instead of guessing, they will walk you through it and if that's not the issue they will help you find out what is.

            Comment

            • john175
              Junior Member
              • Mar 2015
              • 2

              #7
              TPMS3

              Had the same problem. Take the unit out of the dock plug in the module, turn on the unit to first screen module should start blinking only takes about few seconds and your done.

              Comment

              • planenut_2000
                Junior Member
                • Jan 2016
                • 5

                #8
                Originally posted by john175
                Had the same problem. Take the unit out of the dock plug in the module, turn on the unit to first screen module should start blinking only takes about few seconds and your done.
                Thanks! I'll give that a try and report back tomorrow night

                Comment

                • planenut_2000
                  Junior Member
                  • Jan 2016
                  • 5

                  #9
                  Thanks for help! That fixed the problem.

                  Comment

                  • john175
                    Junior Member
                    • Mar 2015
                    • 2

                    #10
                    glad i coild help.

                    Comment

                    Working...