Snapon Diagnostics Product Forums Diagnostic Home . Diagnostic Product Index . Customer Care        
Diagnostic SoftwareDiagnostic PlatformsAsk-a-Tech, Automotive Repair InformationTech Central
Go Back   Snapon Diagnostics Product Forums > Snap-on Diagnostic Products > Diagnostic Platforms > Verus User Forum
Home Today's Posts Register Members List FAQ
Thank you for visiting Snap-on Diagnostics Product Forums.
You are currently NOT logged in to a registered account. Some functions of Snap-on Diagnostics Product Forums will not be available to you if your are not logged in as a registered member. For a limited time only, registrationto Snap-on Diagnostics Product Forums to Snap-on Diagnostics Product Forums is !! FREE !! Select the    **REGISTER NOW**    link to register for your FREE Snap-on Diagnostics Product Forums account!!

Thread Tools Display Modes
Old 12-11-2018, 06:21 PM
ShopFlunkie ShopFlunkie is offline
Junior Member
Join Date: Dec 2018
Posts: 4
ShopFlunkie Congratulations!  Your peers have given you enough reputation to put you into the fist level!


After clearing the codes and running the EPB verification test again this past Friday, while my Snap On tech rep was trying to find a problem with why my Verus would not update, the original code disappeared. Now I have a C0062-54 longitudinal acceleration sensor missing calibration code, there are no ORC codes and I have done the G-Sensor alignment which was successful. The rear brakes are disc, so there is no park brake adjustment. The brakes are working fine and I have no problems driving the vehicle. The EPB works normal, even the don't run over yourself by jumping out with the car in gear feature. I just cannot get rid of the service park brake message. The original problem was a stuck park brake because of water intrusion through the connector, repaired by replacing the connector and EPBM per a service bulletin for the same issue.
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

All times are GMT -7. The time now is 05:40 PM.

Reminder: Your participation in these areas of the site is solely at your own risk. The
information is only the opinion of the poster, is no substitute for your own research,
and should not be relied upon for business critical decisions or any other purpose.
Never assume that you are anonymous and cannot be identified by your posts.
We reserve the right to discontinue any users' use of any such public forum
for any reason. Please read the Terms of Service.

Snap-on is a trademark, registered in the United States and other countries, of Snap-on Incorporated. Other marks are marks of their respective holders.
©2009 Snap-on Incorporated. All rights reserved.