With the 14.2 public release do out any day, I would like to see what other's still feel is missing, broken, lacking, or otherwise could be improved upon.
In my personal opinion the coverage as a whole has gotten better as well as the tool line up.
I Believe Some of that Is do to what we ask for here on the forum.
1. Data Pids During functional testing.
Example: Some vehicle lines show some data while performing an Evap test while others do not.
Personally I would like to see what's going on during a Evap test on all lines. For me personally, that would be the GM truck line up. Currently it performs the test but shows no Data during the test??? If the scan tool can read it for testing, Why not display it???
2. All modules scan on CAN network vehicles. This way I know if a specific Module is present or if I know I need to go to a specific module, I can see if the module is reading or not.
Example: Airbag light is on, Maybe the Module for the seat is dead or damaged when it comes in. Before I look up the fault code and then go to that specific module to look for data, I can see the seat module is not online.
Knowing that could direct me to look in that area to make sure everything Is ok before I proceed to chase my tail on a component that might not be bad since the module is not communicating.
3. Troubleshooter, We know you backfill when possible. If there is factory code it should be in there with the factory description.
But what about giving us the ability to go to Troubleshooter from the Code?
I spend enough money on the updates. I am not signing up and Paying for a web site to get the missing info that should be in the troubleshooter to begin with. Not to mention when I get the updates, the dealers always state they know nothing about the website's or the how to get the activation code for the free trail when you purchase updates.
Well What about the rest of you??? Anything you would like to see get fixed, added, or improved upon???
Let's try not repeat the known issues that Snappy is already working on or have acknowledged within the forum.
In my personal opinion the coverage as a whole has gotten better as well as the tool line up.
I Believe Some of that Is do to what we ask for here on the forum.
1. Data Pids During functional testing.
Example: Some vehicle lines show some data while performing an Evap test while others do not.
Personally I would like to see what's going on during a Evap test on all lines. For me personally, that would be the GM truck line up. Currently it performs the test but shows no Data during the test??? If the scan tool can read it for testing, Why not display it???
2. All modules scan on CAN network vehicles. This way I know if a specific Module is present or if I know I need to go to a specific module, I can see if the module is reading or not.
Example: Airbag light is on, Maybe the Module for the seat is dead or damaged when it comes in. Before I look up the fault code and then go to that specific module to look for data, I can see the seat module is not online.
Knowing that could direct me to look in that area to make sure everything Is ok before I proceed to chase my tail on a component that might not be bad since the module is not communicating.
3. Troubleshooter, We know you backfill when possible. If there is factory code it should be in there with the factory description.
But what about giving us the ability to go to Troubleshooter from the Code?
I spend enough money on the updates. I am not signing up and Paying for a web site to get the missing info that should be in the troubleshooter to begin with. Not to mention when I get the updates, the dealers always state they know nothing about the website's or the how to get the activation code for the free trail when you purchase updates.
Well What about the rest of you??? Anything you would like to see get fixed, added, or improved upon???
Let's try not repeat the known issues that Snappy is already working on or have acknowledged within the forum.
Comment