Snapon Diagnostics Product Forums Diagnostic Home . Diagnostic Product Index . Customer Care        
Diagnostic SoftwareDiagnostic PlatformsAsk-a-Tech, Automotive Repair InformationTech Central
Go Back   Snapon Diagnostics Product Forums > Snap-on Diagnostic Products > Diagnostic Platforms > Modis User Forum
Home Today's Posts Register Members List FAQ
Snap-on Diagnostics VerusPro
Thank you for visiting Snap-on Diagnostics Product Forums.
You are currently NOT logged in to a registered account. Some functions of Snap-on Diagnostics Product Forums will not be available to you if your are not logged in as a registered member. For a limited time only, registrationto Snap-on Diagnostics Product Forums to Snap-on Diagnostics Product Forums is !! FREE !! Select the    **REGISTER NOW**    link to register for your FREE Snap-on Diagnostics Product Forums account!!

Reply
 
Thread Tools Display Modes
  #1  
Old 06-14-2012, 11:39 AM
landroverman1958 landroverman1958 is offline
Member
 
Join Date: Feb 2010
Location: wales in uk
Posts: 46
landroverman1958 Congratulations!  Your peers have given you enough reputation to put you into the fist level!

Default Nissan X Trail

2005 nissan X trail 2.2 dci, drivability problem,,,,,,,,, crank ,start ok drive away full power no problem,,,, stop in traffic idle for a while go to pull away lack of power rpm only up to 2500rpm, key off back on start full power, idle again no power and rev,s lilited to 2500rpm,
Fault codes EOBD P1273, P0234 and P0089, now i have checked and have been told this type of vehicle suffers High Pressure injection problems,
Is that correct
Two of the codes are for fuel pump related faults the other an over boost problem,
Any thoughts
Reply With Quote
  #2  
Old 07-26-2012, 11:41 AM
landroverman1958 landroverman1958 is offline
Member
 
Join Date: Feb 2010
Location: wales in uk
Posts: 46
landroverman1958 Congratulations!  Your peers have given you enough reputation to put you into the fist level!

Default

Had the x trail in today, fault has been resolved----- by having the high pressure fuel pump overhauled, that was after changing the metering valve soleniod on the pump,
That made no difference so the pump was reconditioned,
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT -7. The time now is 11:49 AM.


Reminder: Your participation in these areas of the site is solely at your own risk. The
information is only the opinion of the poster, is no substitute for your own research,
and should not be relied upon for business critical decisions or any other purpose.
Never assume that you are anonymous and cannot be identified by your posts.
We reserve the right to discontinue any users' use of any such public forum
for any reason. Please read the Terms of Service.

Snap-on is a trademark, registered in the United States and other countries, of Snap-on Incorporated. Other marks are marks of their respective holders.
2009 Snap-on Incorporated. All rights reserved.