https://productforum.autorepairdata.com/ en Sun, 05 Jul 2026 20:05:14 GMT vBulletin 60 https://productforum.autorepairdata.com/images/misc/rss.png https://productforum.autorepairdata.com/ https://productforum.autorepairdata.com/forum/snap-on-diagnostic-products/diagnostic-platforms/scanner-capabilities/158897-2024-pacifica-codes-only-on-most-modules Fri, 03 Jul 2026 19:36:59 GMT 2024 Chrysler Pacifica I read all codes and things were going Ok. But then I went to the module menu and only a handful of modules show up. I have... PXL_20260703_162743932.jpg PXL_20260703_162718504.jpg PXL_20260703_162725769.jpg]]> Scanner Capabilities greasybob https://productforum.autorepairdata.com/forum/snap-on-diagnostic-products/diagnostic-platforms/scanner-capabilities/158897-2024-pacifica-codes-only-on-most-modules https://productforum.autorepairdata.com/forum/snap-on-diagnostic-products/diagnostic-platforms/modis-user-forum/158886-modis-housing Wed, 01 Jul 2026 20:20:11 GMT I just got a modis eems300 and I had to open it up because it was not working. Somehow the ribbon cable was not pushed in all the way. Anyways mostly... I just got a modis eems300 and I had to open it up because it was not working. Somehow the ribbon cable was not pushed in all the way. Anyways mostly all the screw posts just broke and turned to dust lol. Anyone has or knows where I can get a replacement front and back housing? Got the scanner and adapters for free to give me live data on my 95 ford e350. Modis User Forum Lynnboy021 https://productforum.autorepairdata.com/forum/snap-on-diagnostic-products/diagnostic-platforms/modis-user-forum/158886-modis-housing https://productforum.autorepairdata.com/forum/snap-on-diagnostic-products/diagnostic-platforms/scanner-capabilities/158839-silverado-2-7-purge-and-seal-test Thu, 18 Jun 2026 17:00:00 GMT Doing a purge and seal evap test on a 2021 Silverado with the 2.7 Turbo. As you mat know the purge valve is located on the atmosphere side of the... 3DE38AB775414931A28E894C74A608E2.jpg 3DE38AB775414931A28E894C74A608E2.jpgDoing a purge and seal evap test on a 2021 Silverado with the 2.7 Turbo. As you mat know the purge valve is located on the atmosphere side of the throttle valve so there is no vacuum. Instead this vehicle has a small vacuum located on the intake manifold to draw vapors out of the canister. My question is, shouldn't the pump be commanded on during this test ? As you can see in the screen shot it is not being commanded on. The puge valve and vent vent valve are being commanded and are operational, without vacuum though the test is a mute point. Is this a snap on error or a GM oversight. The code I had was P0446 and was a plugged or stuck vent valve which I replaced and solved the problem. Just wondering about the purge and seal test. A larger image below ?]]> Scanner Capabilities greasybob https://productforum.autorepairdata.com/forum/snap-on-diagnostic-products/diagnostic-platforms/scanner-capabilities/158839-silverado-2-7-purge-and-seal-test