Variable valve lift test

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • jm43130
    Senior Member
    • Apr 2008
    • 185

    Variable valve lift test

    I had a 2018 Jeep Grand Cherokee 3.6 v6, that set a code P105d for intake valve stuck on high lift. . Needed to use variable valve lift test to pin down which cylinder was setting this code, as it had not set any misfire code yet. I was unable to locate this test on Zues +. I couldn't find it anywhere. Is it not available in Snapon yet ?. Because Matco Max 4 had test and showed cylinder 2 as problem.
  • Steve6911
    Moderator
    • Feb 2007
    • 2229

    #2
    Hi John
    Thank you for posting that. Without a same YMM vehicle I can't tell with my scanners so I asked someone who may be able to find out. He is away for the weekend and will let me know when he gets back if he can help with that.

    Thanks again!
    Steve

    Comment

    • Steve6911
      Moderator
      • Feb 2007
      • 2229

      #3
      Hi John
      best I can see that function is not in the scanner, THANK YOU for reporting it. I will forward to post to the correct place, by chance would you have the complete VIN? And what build is on your tool?

      Steve

      Comment

      • jm43130
        Senior Member
        • Apr 2008
        • 185

        #4
        Full vin is 1c4rjfcg7jc100354 and build software is 24.2 on my zues

        Comment

        • Steve6911
          Moderator
          • Feb 2007
          • 2229

          #5
          THANK YOU again!

          Comment

          Working...