If this is your first visit, be sure to
check out the FAQ. You may have to register
before you can post: click the register link to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Thanks for the link , I have seen that previously but was offered the 3000 version very cheaply. Looking at the 3000 version not even the online manual refers to what I have. There are some inputs for coil primary, battery feed and two auxiliaries, then there are the four channel outputs with two grounds, then on top of the unit where the hook is there is another plug connector that is square in shape (not USB) and I don't know what that is for?
I could work out how to power up the SIA 3000 but the four channels must go to a PC or something before connection to the vehicle otherwise the inputs to the SIA 3000 are meaningless as you can't see them?
Mr. Green,
I use a custom made box(old Sun electric piece similar to what you have) for various car lines, it allows me to gather up to 8 individual signals and display them on one channel.It also has usb support for pressure transducers and other stuff you may want to power up off a 5 volt ref..like factory evap/map etc sensors and transducers, But does help on those head scratchers and Tool inadequacies. I use several other modified probes from Sun Electric Machines I have owned in the past also. Just be aware of the voltage kicks in some components we test.Scales may be out of order, but good patterns to evaluate if you read between the lines
Play time and common sense will keep you wallet fatter..
Comment