Vantage Pro no measurement problem

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • matej4a
    Junior Member
    • Sep 2016
    • 2

    Vantage Pro no measurement problem

    Hi, guys.
    I have recently noticed that I can not do any measurements with my VP.
    When I start machine I can not hear clicking noise that I have used to. I can scrool through the menu OK(but there is no click),every buttons are working,I can set the scale but when I try to measure anything nothing happens.
    Last thing I have measured with it was whell speed sensor.It measured perfect.
    But yesterday when I have tried to measured dfm signal from alternator nothing.When I set to digital measurement (voltage curent ohms) only zeros. I though that the problem was in cables but this isnt the case.
    Please for help
    Thank you in advance
    Matej
  • Steve6911
    Moderator
    • Feb 2007
    • 2167

    #2
    Here is the link to the customer support lines. Pick the one that pertains to your build.

    Comment

    Working...